Project

General

Profile

Bug #2460 » lighttpd.conf

jeisom, 2012-11-16 19:36

 
#######################################################################
##
## /etc/lighttpd/lighttpd.conf
##
## check /etc/lighttpd/conf.d/*.conf for the configuration of modules.
##
#######################################################################

#######################################################################
##
## Some Variable definition which will make chrooting easier.
##
## if you add a variable here. Add the corresponding variable in the
## chroot example aswell.
##
#var.log_root = "/usr/local/apache2/webdav/usrfolder/lighttpd/log"
#var.server_root = "/usr/local/apache2/webdav/usrfolder/"
#var.state_dir = "/usr/local/apache2/webdav/usrfolder/lighttpd/run"
#var.home_dir = "/var/lib/"
#var.conf_dir = "/usr/local/apache2/webdav/usrfolder/lighttpd/etc/lighttpd"

##
## run the server chrooted.
##
## This requires root permissions during startup.
##
## If you run Chrooted set the the variables to directories relative to
## the chroot dir.
##
## example chroot configuration:
##
var.log_root = "/lighttpd/log"
var.server_root = "/"
var.state_dir = "/var/run"
var.home_dir = "/lighttpd"
#var.vhosts_dir = "/vhosts"
var.conf_dir = "/lighttpd/etc"
#
server.chroot = "/usr/local/apache2/webdav/usrfolder/"

##
## Some additional variables to make the configuration easier
##

##
## Base directory for all virtual hosts
##
## used in:
## conf.d/evhost.conf
## conf.d/simple_vhost.conf
## vhosts.d/vhosts.template
##
#var.vhosts_dir = server_root + "/vhosts"

##
## Cache for mod_compress
##
## used in:
## conf.d/compress.conf
##
#var.cache_dir = "/var/cache/lighttpd"

##
## Base directory for sockets.
##
## used in:
## conf.d/fastcgi.conf
## conf.d/scgi.conf
##
var.socket_dir = home_dir + "/sockets"

##
#######################################################################

#######################################################################
##
## Load the modules.
include "modules.conf"

##
#######################################################################

#######################################################################
##
## Basic Configuration
## ---------------------
##
server.port = 8080

##
## Use IPv6?
##
#server.use-ipv6 = "enable"

##
## bind to a specific IP
##
server.bind = "192.168.200.254"

##
## Run as a different username/groupname.
## This requires root permissions during startup.
##
server.username = "nobody"
server.groupname = "nogroup"

##
## enable core files.
##
#server.core-files = "disable"

##
## Document root
##
server.document-root = server_root

##
## The value for the "Server:" response field.
##
## It would be nice to keep it at "lighttpd".
##
#server.tag = "lighttpd"

##
## store a pid file
##
server.pid-file = state_dir + "/lighttpd.pid"

##
#######################################################################

#######################################################################
##
## Logging Options
## ------------------
##
## all logging options can be overwritten per vhost.
##
## Path to the error log file
##
server.errorlog = log_root + "/error.log"

##
## If you want to log to syslog you have to unset the
## server.errorlog setting and uncomment the next line.
##
#server.errorlog-use-syslog = "enable"

##
## Access log config
##
include "conf.d/access_log.conf"

##
## The debug options are moved into their own file.
## see conf.d/debug.conf for various options for request debugging.
##
include "conf.d/debug.conf"

##
#######################################################################

#######################################################################
##
## Tuning/Performance
## --------------------
##
## corresponding documentation:
## http://www.lighttpd.net/documentation/performance.html
##
## set the event-handler (read the performance section in the manual)
##
## possible options on linux are:
##
## select
## poll
## linux-sysepoll
##
## linux-sysepoll is recommended on kernel 2.6.
##
server.event-handler = "poll"

##
## The basic network interface for all platforms at the syscalls read()
## and write(). Every modern OS provides its own syscall to help network
## servers transfer files as fast as possible
##
## linux-sendfile - is recommended for small files.
## writev - is recommended for sending many large files
##
server.network-backend = "writev"

##
## As lighttpd is a single-threaded server, its main resource limit is
## the number of file descriptors, which is set to 1024 by default (on
## most systems).
##
## If you are running a high-traffic site you might want to increase this
## limit by setting server.max-fds.
##
## Changing this setting requires root permissions on startup. see
## server.username/server.groupname.
##
## By default lighttpd would not change the operation system default.
## But setting it to 2048 is a better default for busy servers.
##
server.max-fds = 256

##
## Stat() call caching.
##
## lighttpd can utilize FAM/Gamin to cache stat call.
##
## possible values are:
## disable, simple or fam.
##
server.stat-cache-engine = "simple"

##
## Fine tuning for the request handling
##
## max-connections == max-fds/2 (maybe /3)
## means the other file handles are used for fastcgi/files
##
server.max-connections = 128

##
## How many seconds to keep a keep-alive connection open,
## until we consider it idle.
##
## Default: 5
##
server.max-keep-alive-idle = 15

##
## How many keep-alive requests until closing the connection.
##
## Default: 16
##
#server.max-keep-alive-requests = 16

##
## Maximum size of a request in kilobytes.
## By default it is unlimited (0).
##
## Uploads to your server cant be larger than this value.
##
#server.max-request-size = 0

##
## Time to read from a socket before we consider it idle.
##
## Default: 60
##
#server.max-read-idle = 60

##
## Time to write to a socket before we consider it idle.
##
## Default: 360
##
#server.max-write-idle = 360

##
## Traffic Shaping
## -----------------
##
## see /usr/share/doc/lighttpd/traffic-shaping.txt
##
## Values are in kilobyte per second.
##
## Keep in mind that a limit below 32kB/s might actually limit the
## traffic to 32kB/s. This is caused by the size of the TCP send
## buffer.
##
## per server:
##
#server.kbytes-per-second = 128

##
## per connection:
##
#connection.kbytes-per-second = 32

##
#######################################################################

#######################################################################
##
## Filename/File handling
## ------------------------

##
## files to check for if .../ is requested
## index-file.names = ( "index.php", "index.rb", "index.html",
## "index.htm", "default.htm" )
##
index-file.names += (
"index.xhtml", "index.html", "index.htm", "default.htm", "index.php"
)

##
## deny access the file-extensions
##
## ~ is for backupfiles from vi, emacs, joe, ...
## .inc is often used for code includes which should in general not be part
## of the document-root
url.access-deny = ( "~", ".inc" )

##
## disable range requests for pdf files
## workaround for a bug in the Acrobat Reader plugin.
##
#$HTTP["url"] =~ "\.pdf$" {
# server.range-requests = "disable"
#}

##
## url handling modules (rewrite, redirect)
##
#url.rewrite = ( "^/$" => "/server-status" )
#url.redirect = ( "^/wishlist/(.+)" => "http://www.example.com/$1" )

##
## both rewrite/redirect support back reference to regex conditional using %n
##
#$HTTP["host"] =~ "^www\.(.*)" {
# url.redirect = ( "^/(.*)" => "http://%1/$1" )
#}

##
## which extensions should not be handle via static-file transfer
##
## .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi
##
static-file.exclude-extensions = ( ".php", ".pl", ".fcgi", ".scgi" )

##
## error-handler for status 404
##
#server.error-handler-404 = "/error-handler.html"
#server.error-handler-404 = "/error-handler.php"

##
## Format: <errorfile-prefix><status-code>.html
## -> ..../status-404.html for 'File not found'
##
#server.errorfile-prefix = "/srv/www/htdocs/errors/status-"

##
## mimetype mapping
##
include "conf.d/mime.conf"

##
## directory listing configuration
##
include "conf.d/dirlisting.conf"

##
## Should lighttpd follow symlinks?
##
server.follow-symlink = "enable"

##
## force all filenames to be lowercase?
##
#server.force-lowercase-filenames = "disable"

##
## defaults to /var/tmp as we assume it is a local harddisk
##
server.upload-dirs = ( "/usr/local/apache2/webdav/usrfolder/tmp" )

##
#######################################################################


#######################################################################
##
## SSL Support
## -------------
##
## To enable SSL for the whole server you have to provide a valid
## certificate and have to enable the SSL engine.::
##
## ssl.engine = "enable"
## ssl.pemfile = "/path/to/server.pem"
##
## The HTTPS protocol does not allow you to use name-based virtual
## hosting with SSL. If you want to run multiple SSL servers with
## one lighttpd instance you must use IP-based virtual hosting: ::
##
## $SERVER["socket"] == "10.0.0.1:443" {
## ssl.engine = "enable"
## ssl.pemfile = "/etc/ssl/private/www.example.com.pem"
## #
## # Mitigate BEAST attack:
## #
## # A stricter base cipher suite. For details see:
## # http://blog.ivanristic.com/2011/10/mitigating-the-beast-attack-on-tls.html
## #
## ssl.cipher-list = "ECDHE-RSA-AES256-SHA384:AES256-SHA256:RC4-SHA:RC4:HIGH:!MD5:!aNULL:!EDH:!AESGCM"
## #
## # Make the server prefer the order of the server side cipher suite instead of the client suite.
## # This is necessary to mitigate the BEAST attack (unless you disable all non RC4 algorithms).
## # This option is enabled by default, but only used if ssl.cipher-list is set.
## #
## # ssl.honor-cipher-order = "enable"
## #
## # Mitigate CVE-2009-3555 by disabling client triggered renegotation
## # This is enabled by default.
## #
## # ssl.disable-client-renegotiation = "enable"
## #
## server.name = "www.example.com"
##
## server.document-root = "/srv/www/vhosts/example.com/www/"
## }
##

## If you have a .crt and a .key file, cat them together into a
## single PEM file:
## $ cat /etc/ssl/private/lighttpd.key /etc/ssl/certs/lighttpd.crt \
## > /etc/ssl/private/lighttpd.pem
##
#ssl.pemfile = "/etc/ssl/private/lighttpd.pem"

##
## optionally pass the CA certificate here.
##
##
#ssl.ca-file = ""

##
#######################################################################

#######################################################################
##
## custom includes like vhosts.
##
#include "conf.d/config.conf"
#include_shell "cat /etc/lighttpd/vhosts.d/*.conf"
##
#######################################################################
(1-1/2)