lighty labs

2017-11-09

15:54 Lighttpd Support: RE: Lighthttpd not starting up with default fastcgi config

I tested it and can confirm that it works if parenthesis are set as advised. The default fastcgi.conf delivered in th... thnow

14:47 Lighttpd Support: RE: Lighthttpd not starting up with default fastcgi config

Sure, no problem, I reverted it, but I did it again this is actual state:
http://paste.lighttpd.net/v4#g3KQbXKwJmy... thnow

14:36 Lighttpd Support: RE: Lighthttpd not starting up with default fastcgi config

Thanks for the enlightment. Now I see it. If i try to remove the parenthesis I just get parser errors.... thnow

14:23 Lighttpd Support: RE: Lighthttpd not starting up with default fastcgi config

Parenthesis is exactly set like you mentioned in the example config as in my own config. My configuration was working... thnow

12:21 Lighttpd Support: [Solved] Lighttpd not starting up with default fastcgi config

Hi,
I recently upgraded to 1.4.47 on 7.4.1708 from epel repo. Since then lighttpd fails to start with my fastcgi ... thnow