How to set up a git server over http(s) » History » Revision 15
Revision 14 (gstrauss, 2022-05-13 21:06) → Revision 15/17 (gstrauss, 2022-05-13 21:09)
h1. How to set up a git server over HTTP (s)
{{>toc}}
One may have already set up a git server; it's as easy as enabling ssh on a *NIX machine.
*But one may have encountered* the not-so-usual situation where you're on a random network and *you can't access port 22!*
This is a guide on how to set up a git over HTTPS server using the "git Smart-HTTP protocol":https://git-scm.com/book/en/v2/Git-on-the-Server-Smart-HTTP.
h2. Step 1: Permissions, permissions and more permissions!
See: [[FrequentlyAskedQuestions#Why-do-I-get-403-Forbidden|FAQ: Why do I get 403 Forbidden?]]
Permissions are very important! Remember that git will be performing reads and writes to directories and files! Be sure to set up your user and group correctly. You may have to @chmod@ and @chown@ your git repo in order for it to be accessible to user/group under which the lighttpd server runs. lighttpd runs CGI programs (e.g. git) under the user/group that lighttpd runs. (Additional configuration with helper programs -- such as "execwrap":https://git.stbuehler.de/stbuehler/execwrap or [[SuEXEC|suEXEC]] -- can change that, but doing so is not discussed further here).
h2. Step 2: Dependencies and Modules Modules.
For system dependencies, you will require (of course)
- @git@ (make sure you have the @/usr/lib/git-core/git-http-backend@ binary, this should be installed by default with the git package on Arch Linux)
For lighttpd modules, you will require:
- [[Docs_ModCGI|mod_cgi]]
- [[Docs_ModAlias|mod_alias]]
- [[Docs_ModSetEnv|mod_setenv]]
- [[Docs_ModAuth|mod_auth]] (optional) with @mod_authn_file@.
h2. Step 3: Bare Minimum Config for specific repos repos.
*You must use a subdomain or another domain altogether* , else the CGI script will get confused and won't be able to read the paths correctly.
The bare minimum to get the CGI @git-http-backend@ script working is:
- set the environment variable @GIT_PROJECT_ROOT@ to the parent directory of one of your git repositories.
- create a @git-daemon-export-ok@ file inside each git repo you'd like to make accessible.
<pre>
server.modules += ("mod_setenv", "mod_cgi", "mod_alias")
$HTTP["host"] == "git-test.yourdomain.com" {
alias.url = ( "" => "/usr/lib/git-core/git-http-backend" )
setenv.set-environment = ( "GIT_PROJECT_ROOT" => "/var/www/git/" )
cgi.assign = ( "" => "" )
}
</pre>
the code above assumes:
- your domain @git-test.yourdomain.com@ is only used for this CGI script.
- @/var/www/git/@ is a directory with bare git repositories inside them.
- and each repository (server-side) has a @git-daemon-export-ok@ file inside it.
h2. Step 4: Adding automatic repo discovery
Ok, you've got a basic config working. Now you'd like some kind of automatic discovery so that you don't have to manually add each git repo. One can do this by setting the environment variable @GIT_HTTP_EXPORT_ALL@. Remember that you should use the @+=@ operator when wanting to append variables. See [[Docs_ModSetEnv|mod_setenv]]
@setenv.set-environment += ( "GIT_HTTP_EXPORT_ALL" => "" )@
Great! Now you can clone any repo under @/var/www/git/@.
h2. Step 5: Adding Authentication through HTTP HTTP.
According to the git Smart-HTTP docs, git itself does not implement any kind of security. That is the job of the web server, in our case, lighttpd. We can implement security by adding HTTP authentication. Refer to [[Docs_ModAuth|mod_auth]]. the [[Docs_ModAuth|Mod Auth guide]]. The following would allow *only* authenticated users to clone from and push to repositories:
<pre><code class="lighttpd">
# using mod auth with plain text module mod_authn_file
server.modules += ("mod_auth", "mod_authn_file")
server.modules += ("mod_setenv", "mod_cgi", "mod_alias")
$HTTP["host"] == "git-test.yourdomain.com" {
# password file is at /home/www-data/user-info
# example plain-text password file:
# agent007:secret
auth.backend = "plain"
auth.backend.plain.userfile = "/home/www-data/user-info"
# this must be set to require auth under this domain.
auth.require = ( "" => ("method" => "basic", "realm" => "example", "require" => "valid-user") )
alias.url = ( "" => "/usr/lib/git-core/git-http-backend" )
setenv.set-environment = ( "GIT_PROJECT_ROOT" => "/var/www/git/" )
setenv.set-environment += ( "GIT_HTTP_EXPORT_ALL" => "" )
cgi.assign = ( "" => "" )
}
</code></pre>
h2. Step 6: Only allowing secure *HTTPS* connections connections.
This is easy. Just configure https as normal for your subdomain. Then, wrap the code around an @$HTTP["scheme"] == "http"@ conditional and use [[Docs_ModRedirect|mod_redirect]] to [[HowToRedirectHttpToHttps|redirect http requests to https]], creating the final config:
<pre><code class="lighttpd">
# git server over HTTPS configuration for lighttpd
# author: trevcan
# github.com/trevcan/
server.modules += ("mod_openssl")
$SERVER["socket"] == ":443" {
ssl.engine = "enable"
ssl.privkey = "/etc/keys/yourdomain.com/privkey.pem"
ssl.pemfile = "/etc/keys/yourdomain.com/fullchain.pem"
}
# log CGI stderr to separate log
server.breakagelog = "/var/log/lighttpd/breakage.log
# using mod auth with plain text module mod_authhn_file
server.modules += ("mod_auth", "mod_authn_file")
server.modules += ("mod_redirect", "mod_setenv", "mod_cgi", "mod_alias")
$HTTP["host"] == "git-test.yourdomain.com" {
ssl.privkey = "/etc/keys/git-test.yourdomain.com/privkey.pem"
ssl.pemfile = "/etc/keys/git-test.yourdomain.com/fullchain.pem"
$HTTP["scheme"] == "http" {
url.redirect = ("" => "https://${url.authority}${url.path}${qsa}")
url.redirect-code = 308
} else {
# password file is at /home/www-data/user-info
# example plain-text password file:
# agent007:secret
auth.backend = "plain"
auth.backend.plain.userfile = "/home/www-data/user-info"
# this must be set to require auth under this domain.
auth.require = ( "" => ("method" => "basic", "realm" => "example", "require" => "valid-user") )
}
alias.url = ( "" => "/usr/lib/git-core/git-http-backend" )
setenv.set-environment = ( "GIT_PROJECT_ROOT" => "/var/www/git/" )
setenv.set-environment += ( "GIT_HTTP_EXPORT_ALL" => "" )
cgi.assign = ( "" => "" )
}
</code></pre>
h2. References
- "Smart HTTP":https://git-scm.com/book/en/v2/Git-on-the-Server-Smart-HTTP git documentation.
- [[Docs_ModAuth|Lighttpd Docs Mod Auth]]
- [[Docs_ModCGI|Lighttpd Docs Mod CGI]]
- [[Docs_ModSetEnv|Lighttpd Docs Mod SetEnv]]
- [[Docs_ModAlias|Lighttpd Docs Mod Alias]]
- [[Docs_ModRedirect|Lighttpd Docs Mod Redirect]]
- [[Docs_SSL|Lighttpd Docs TLS/SSL]]