Docs SSL » History » Revision 33
Revision 32 (nigelm, 2008-11-11 12:18) → Revision 33/172 (nitrox, 2009-02-03 21:42)
h1. Secure HTTP
bq. Module: core
bq. keywords: lighttpd, ssl
{{>toc}}
h2. Description
lighttpd supports _SSLv2_ (disabled in 1.4.21 and 1.5) and _SSLv3_ if it is compiled against _openssl_.
h2. How to install SSL
To use SSL you must have ssl compiled into lighty. You must first have
openssl-devel installed and openssl installed as well. On Fedora or
Centos you may use yum to install this by running this command:
bq. yum install openssl*
And type _yes_ when it asks for a confirmation of what you would like to install.
Once installed please download the lighttpd tarball from http://www.lighttpd.net/download and extract it with
bq. tar zxvf lighttpd-1.4.20.tar.gz
Enter into the extracted folder and compile with these configuration flags: ::
bq. --with-openssl --with-openssl-libs=/usr/lib
Remember to change _ --with-openssl-libs= _ to the folder where your openssl libraries are installed into.
Once compiled, run make and make install. If lighty has successfully compiled SSL the command
bq. lighttpd -v
Should display (Keep in mind that this new lighty version now has _(ssl)_ after lightys name)
bq. lighttpd-1.4.11 (ssl) - a light and fast webserver
Build-Date: Sep 1 2006 19:09:15
Remember if you used the RPM packages to install lighty, the init.d scripts will point to the wrong binary of lighty than the one you just compiled. The location of where you compiled lighty should be displayed near the end of make install. Once the location of the binary is found please edit the /etc/init.d/lighttpd script and change what is defined in the lighttpd="/usr/sbin/lighttpd" to your new lighty location.
h2. Configuration
table{margin-left: 2em}.
|_.option |_. description |
| ssl.engine | enable/disable ssl engine |
| ssl.pemfile | path to the PEM file for SSL support |
| ssl.ca-file | path to the CA file for support of chained certificates |
| ssl.use-sslv2 | enable/disable use of SSL version 2 |
| ssl.cipher-list | Configure the allowed SSL ciphers |
h3. Example
To enable SSL for the whole server you have to provide a valid certificate and have to enable the SSL engine. If you want to use chained certificates you must also include the CA file, without it browsers will pop up an _unknown certificate authority_ or some such error.
ssl.engine = "enable"
ssl.pemfile = "/path/to/server.pem"
ssl.ca-file = "/path/to/CA.crt"
Please note that enabling SSL for the whole server as shown above, seem to replace (disable) the non-SSL operations, and if without ssl.ca-file configured, MS IE will accept this certificate but firefox will not.
The HTTPS protocol does not allow you to use name-based virtual hosting with SSL (see UCC certs below). If you want to run multiple SSL servers with one lighttpd instance you must use IP-based virtual hosting:
$SERVER["socket"] == "10.0.0.1:443" {
ssl.engine = "enable"
ssl.pemfile = "www.example.org.pem"
ssl.ca-file = "/etc/CA.crt"
server.name = "www.example.org"
server.document-root = "/www/servers/www.example.org/pages/"
}
If you have a .crt and a .key file, cat them together into a single PEM file (the order isn't strictly important):
$ cat host.key host.crt > host.pem
h3. UCC Certificates
If you have a UCC (Unified Communications Certificates) certificate, then you _can_ use name-based virtual hosting with SSL support for multiple domains/subdomains on one IP address. Bind the UCC cert to the socket as above.
h3. Self-Signed Certificates
A self-signed SSL certificate can be generated like this: ::
$ openssl req -new -x509 \
-keyout server.pem -out server.pem \
-days 365 -nodes
h3. PCI DSS compliance
Matthew Glubb wrote:
I should clarify the reason for this work. From September 19th, all major online vendors taking card payments will be required to comply with the Payment Card Industry (PCI) Data Security Standard. Smaller vendors may self-certify but they will be more liable if fraud is committed.
Part of this standard is the disabling of SSLv2 and the removal of support for ciphers that have a key length of less than 128 bits. For this reason, I believe that the default SSL configuration for lighttpd should reflect this standard.
Since 1.4.12 you can use: ::
ssl.use-sslv2 = "disable" - (No longer needed as of 1.4.21 and 1.5 this is disabled by default.)
ssl.cipher-list = "..."
to disable SSLv2 and set a cipher-list. Make sure this settings are in the same block than ssl.engine = "enable", this will not work as global options.
cipher-list accepts a string containing the ciphers you would like to accept separated by whitespace. A list of strings will not work.
Matthew also provide a list of possible ciphers:
Hope it can be of use. Next time I'll submit a proper svn patch but I was in a hurry! Which might explain my somewhat short list of supported ciphers. I've since done some research and this list of supported ciphers is much more comprehensive. It supports all ciphers >= 128 bit key lengths for SSL v3.0, TLS v1.0, and AES cipher suites from RFC3268, extending TLS v1.0 (these seem to be the ones used by recent browsers, not included in the original list): ::
RC4-SHA
RC4-MD5
ADH-RC4-MD5
EDH-RSA-DES-CBC3-SHA
EDH-DSS-DES-CBC3-SHA
DES-CBC3-SHA
ADH-DES-CBC3-SHA
DES-CBC3-MD5
AES128-SHA
AES256-SHA
DH-DSS-AES128-SHA
DH-DSS-AES256-SHA
DH-RSA-AES128-SHA
DH-RSA-AES256-SHA
DHE-DSS-AES128-SHA
DHE-DSS-AES256-SHA
DHE-RSA-AES128-SHA
DHE-RSA-AES256-SHA
[FYI] bb says: the requirements permit use of SSLv2 as long as it isn't the only version available. for example, having SSLv2, SSLv3, and TLSv1 enabled is PCI compliant. SSLv2 should still be disabled, however, both because it is weak and because you can expect the PCI requirements to become more stringent in the future. here is my recommended cipher list, in order, which also happens to be PCI compliant: ::
DHE-RSA-AES256-SHA
DHE-RSA-AES128-SHA
EDH-RSA-DES-CBC3-SHA
AES256-SHA
AES128-SHA
DES-CBC3-SHA
DES-CBC3-MD5
RC4-SHA
RC4-MD5
h3. PCI DSS compliance
How to enable that the server requests a SSL client certificate?
h3. HTTPS detection in PHP
Some PHP scripts try to detect HTTPS by checking if $_SERVER['HTTPS'] equals 'on'. To allow that, you can try this: ::
server.modules = (
"mod_setenv",
)
$SERVER["socket"] == "0.0.0.0:443" {
ssl.engine = "enable"
ssl.pemfile = "/etc/lighttpd/server.pem"
ssl.use-sslv2 = "disable"
setenv.add-environment = (
"HTTPS" => "on"
)
}
* [[HowToSimpleSSL]]
* "Setting up Lighttpd with a SSL certificate":http://www.varlogarthas.net/blog/2007/03/installing_a_godaddy_ssl_certi.html
* [[HowToRedirectHttpToHttps|Redirect HTTP requests to HTTPS]]
* "ssl.ca-file ticket resolution":http://trac.lighttpd.net/trac/ticket/19