Actions
Howto Munin » History » Revision 5
« Previous |
Revision 5/10
(diff)
| Next »
icy, 2009-10-10 20:11
Howto Munin¶
Installation¶
Download this file: lighttpd2_munin.py and save it as "lighttpd" in the directory where all
your munin plugins reside (usually this is /usr/share/munin/plugins/) and make it executeable (chmod +x).
Then issue any of the following commands (with appropriate paths) to enable the graphs:
$ ln -s /usr/share/munin/plugins/lighttpd /etc/munin/plugins/lighttpd_requests $ ln -s /usr/share/munin/plugins/lighttpd /etc/munin/plugins/lighttpd_connections $ ln -s /usr/share/munin/plugins/lighttpd /etc/munin/plugins/lighttpd_traffic
You need to enable mod_status in your config. Example config:
if req.path == "/status" { status.info; }
Now restart your munin-node service and wait for the graphs to appear.
If you use a different URL for your status page, you'll need to put the following snippet
in your munin node config file (usually /etc/munin/plugin-conf.d/munin-node):
[lighttpd_*] env.statusurl http://ip/other_status
Screenshots¶
Updated by icy about 15 years ago · 5 revisions