Project

General

Profile

Actions

Howto Munin » History » Revision 6

« Previous | Revision 6/10 (diff) | Next »
icy, 2010-06-12 17:02


Howto Munin

Installation

Download this file: lighttpd2_munin.py and save it as "lighttpd" in the directory where all
your munin plugins reside (usually this is /usr/share/munin/plugins/) and make it executeable (chmod +x).

Then issue any of the following commands (with appropriate paths) to enable the graphs:

$ ln -s /usr/share/munin/plugins/lighttpd /etc/munin/plugins/lighttpd_requests
$ ln -s /usr/share/munin/plugins/lighttpd /etc/munin/plugins/lighttpd_connections
$ ln -s /usr/share/munin/plugins/lighttpd /etc/munin/plugins/lighttpd_traffic
$ ln -s /usr/share/munin/plugins/lighttpd /etc/munin/plugins/lighttpd_statuscodes

You need to enable mod_status in your config. Example config:

if req.path == "/status" { status.info; }

Now restart your munin-node service and wait for the graphs to appear.

If you use a different URL for your status page, you'll need to put the following snippet
in your munin node config file (usually /etc/munin/plugin-conf.d/munin-node):

[lighttpd_*]
env.statusurl http://ip/other_status

Screenshots

Updated by icy almost 14 years ago · 6 revisions