Project

General

Profile

Howto Munin » History » Revision 7

Revision 6 (icy, 2010-06-12 17:02) → Revision 7/10 (icy, 2010-06-15 19:03)

h1. Howto Munin 

 h2. Installation 

 Download this file: attachment:lighttpd2_munin.py and save it as "lighttpd" in the directory where all 
 your munin plugins reside (usually this is /usr/share/munin/plugins/) and make it executeable (chmod +x). 

 Then issue any of the following commands (with appropriate paths) to enable the graphs: 
 <pre> 
 $ ln -s /usr/share/munin/plugins/lighttpd /etc/munin/plugins/lighttpd_requests 
 $ ln -s /usr/share/munin/plugins/lighttpd /etc/munin/plugins/lighttpd_traffic /etc/munin/plugins/lighttpd_connections 
 $ ln -s /usr/share/munin/plugins/lighttpd /etc/munin/plugins/lighttpd_statuscodes /etc/munin/plugins/lighttpd_traffic 
 $ ln -s /usr/share/munin/plugins/lighttpd /etc/munin/plugins/lighttpd_connections /etc/munin/plugins/lighttpd_statuscodes 
 </pre> 

 You need to enable [[mod_status]] in your config. Example config: 

 <pre> 
 if req.path == "/status" { status.info; } 
 </pre> 

 Now restart your munin-node service and wait for the graphs to appear. 

 If you use a different URL for your status page, you'll need to put the following snippet 
 in your munin node config file (usually /etc/munin/plugin-conf.d/munin-node): 

 <pre> 
 [lighttpd_*] 
 env.statusurl http://ip/other_status 
 </pre> 

 h2. Screenshots 

 !lighttpd_connections-day.png! 

 !lighttpd_traffic-day.png! 

 !lighttpd_requests-day.png! 
 !lighttpd_traffic-day.png! 
 !lighttpd_statuscodes-day.png! 
 !lighttpd_connections-day.png!