Project

General

Profile

Actions

Docs Performance » History » Revision 33

« Previous | Revision 33/46 (diff) | Next »
gstrauss, 2021-08-29 01:12


Performance Tuning

Resource Tuning is recommended before diving into the details below.

important performance tuning rules

  1. Prefer lighttpd defaults unless you have a reason to change a setting, and unless you test that changing the setting is beneficial to you.
  2. Proper functionality is more important than marginal increases in performance; a web server that does not function as intended is not useful.
    Do not sacrifice security or desired operational functioning for marginal performance improvements.
  3. Performance tuning is not magic. The recommended approach is that one change be made at a time, that the change be tested and benchmarked, and that if the change does not have a measurable and positive impact in real-world scenarios, that the change be reverted.

lighttpd is generally pretty snappy. Most of the following are micro-optimizations. No changes are required unless you have a specific performance issue that you must address.
(Please refer to configuration options for details about any of the options listed below.)

lighttpd configuration performance tuning (technical guidelines)

  • less is more (and is often simpler, too)
    • rely on defaults where possible to reduce unnecessary (duplicative) config processing (at runtime) to process configuration directives which were already set to the default values
    • set config options in the global scope rather than repeating in sub-scopes. lighttpd optimizes configuration settings in the global scope and makes those settings the defaults
    • TLS configuration can be set in the global scope and inherited by multiple $SERVER["socket"]
      ssl.pemfile = "..."
      ssl.privkey = "..."
      $SERVER["socket"] == ":443" { ssl.engine = "enable" }
      $SERVER["socket"] == "[::]:443" { ssl.engine = "enable" }
    • list only the modules actually used and enabled in server.modules; comment out the others
      - each loaded module registers itself into lighttpd hooks and gets a chance to handle each request, which is is unnecessary if a module is loaded but not otherwise configured to be used
      - server.compat-module-load = "disable" skips loading the default modules (mod_indexfile, mod_dirlisting, mod_staticfile), and you can then explicitly add one or more to server.modules to use them
    • tweaks to remove optional functionality
      - server.tag = "" skips sending "Server: lighttpd/1.4.xx" in responses; alternatively, use: server.tag = "lighttpd" to hide the lighttpd version
      - server.range-requests = "disable" can be used if all server responses are small files, but otherwise it is recommended to be left enabled
    • review the default lighttpd config provided by your distro
      - configs provided by distros aim to be newbie friendly but can introduce complexity of yet another config framework
      - configs provided by distros are often out-dated and then kept for historic compatibility, rather than current best practices
      - example: ~20 years ago some widely used versions of Adobe Acrobat reader plugin PDF clients misbehaved with range requests.
      Unfortunately, the config setting to disable range requests for PDFs has been cargo-culted into configs since then.
      Prefer to comment out or remove: $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" }
    • server.max-connections limits the maximum number of simultaneous connections to handle and also affects memory usage for the connection cache
      - default is (about) 1365 which is oversized for all but the largest systems. Embedded systems might set server.max-connections = 16 or lower
    • server.max-worker = 0 should generally be left unset (or "0"), as CPU bottlenecks are usually elsewhere
    • server.follow-symlink = "enable" (default) should be left enabled. If such restrictions are required, prefer to run a separate lighttp instance under a separate user account, and enforce more restrictive file access permissions.
    • ssl.read-ahead = "disable" (default) is strongly recommended for slower, embedded systems which process TLS packets more slowly than network wire-speed. For faster systems, test if ssl.read-ahead = "enable" improves performance (or not)
    • prefer to configure mod_extforward extforward.hap-PROXY for lighttpd instances behind HAProxy or load balancers supporting the HAProxy PROXY protocol
  • minimize conditional processing (but not at the cost of proper functionality)
    • more conditions means more config processing at runtime
    • more conditions means more memory used by config per request
    • avoid repeating conditions and its opposite by joining them into if/else
      <condition> { ... } else { ... }
      <condition> { ... } else <condition> { ... } else { ... }
    • sometimes it may take fewer config lines to set a config option once in the global scope and then, where necessary, to unset the option in a small number of conditions rather than leaving the default in the global scope and enabling the config option in many more conditions
    • having no config conditions will be among the fastest configs to be processed, but config processing at runtime is fast and is not typically a bottleneck
  • dynamic backends (mod_proxy, mod_fastcgi, mod_scgi, mod_ajp13, ...)
    • prefer to use unix domain sockets (instead of TCP sockets) for connections from lighttpd to backends running on the same host
    • lighttpd can listen on a unix domain socket (server.bind = "/path/to/lighttpd.sock") and lighttpd mod_proxy can act as a reverse-proxy to a backend lighttpd server. Use with mod_extforward to preserve client remote address for the backend.
    • CGI/1.1 environment (or equivalent) is created for many dynamic backends, excluding mod_proxy. The CGI/1.1 environment includes SERVER_ADDR. If server.bind = "*" or other wildcard address, then obtaining SERVER_ADDR costs a system call to getsockname(). If server.bind = "127.0.0.1" or other specific IP address (not a wildcard address), then the syscall is elided.
  • mod_fastcgi
    - Recommended: use PHP-FPM (FastCGI Process Manager), which is available as a package in many OS distros
    - If not using PHP-FPM, then see Docs_PerformanceFastCGI
    • lighttpd provides mechanisms for lighttpd to start up PHP backends, and that works well, but PHP-FPM is the modern and recommended mechanism to manage PHP backends
  • mod_rewrite and mod_redirect: short-circuiting (when using a sequence of regexes)
    • consider putting static file matches (passed through unmodified) first, and using a blank target to indicate no modification
    • consider using a blank match as a catch-all, rather than "^(.*)", which will still match all, but without the regex
      url.rewrite-once = (
      "^/static/|\.(?:css|jpg)$" => "",
      "" => "/index.php${url.path}${qsa}"
      )
  • mod_indexfile: reduce the number of entries in index-file.names, if mod_indexfile is enabled
    • index-file.names = ("index.html") as a list of one or two entries rather than a list of, say, 10 differenent file extensions
  • cache tuning
    • stat_cache: default server.stat_cache-engine = "simple" works well for typical usage and caches stat() results for 1-2 seconds
      Test with server.stat-cache-engine = "inotify" or server.stat-cache-engine = "kqueue" for stat() results to be cached longer (16 seconds)
    • mod_auth: set auth.cache = ("max-age" => "600") to cache passwords (default disabled), but acknowledge changes to your security posture if enabling the cache. (since lighttpd 1.4.56)
    • mod_deflate: set deflate.cache-dir to cache (and reuse) compressed static assets based on ETag (since lighttpd 1.4.56)
    • mod_dirlisting: set dir-listing.cache = ( ... ) to configure caching of generated directory listings (since lighttpd 1.4.60)
  • do not sacrifice security to save a few CPU cycles
    • server.http-parseopts* option defaults are recommended, and are very fast
    • disabling server.http-parseopts* might save a few CPU cycles, but is an anti-pattern for secure configurations
    • server.http-parseopts* options should be modified only when the functionality needs to be tuned for proper site operation
    • ETag response headers are used in HTTP/1.1 conditional caching. ETag response headers are also required for mod_deflate and strongly recommended with mod_webdav. While lighttpd ETag generation for static content can be disabled for micro-benchmarking purposes, ETag generation (default enabled) is recommended for production use (etag.use-inode, etag.use-mtime, etag.use-size)
  • compile lighttpd with mmap support (./configure --enable-mmap) to improve mod_deflate performance

lighttpd configuration for use of operating system (OS) features

lighttpd generally chooses optimal defaults for the OS on which it is running. Prefer lighttpd defaults unless something is not functioning correctly. (Please report bugs and include your platform information if the lighttpd OS defaults are not working correctly.)
  • server.event-handler (e.g. epoll, kqueue, event ports, devpoll, poll, ...)
  • server.network-backend (e.g. sendfile, writev, write)

lighttpd configuration tuning for high-traffic sites with a large number of connections

  • test with server.max-fds = 16384 (or higher) and OS system and/or per-user ulimit -Hn might need to be adjusted to allow this or higher values.
    For each 4k increase in server.max-fds, lighttpd uses an additional ~100 kb of memory for internal structures, not including memory used by each active connection. (In other words, there is a marginal cost for using very high values when there are not nearly so many simultaneous open connections). server.max-connections is calculated to be 1/3 of server.max-fds if server.max-connections is not configured.

lighttpd configuration tuning for low-memory systems

  • test with server.max-fds = 128 (or lower)
  • test with server.max-connections = 16 (or lower)
  • test with server.listen-backlog = 16 (or lower)
  • (default) server.stat_cache-engine = "simple"
  • (default) ssl.read-ahead = "disable"
  • support for the HTTP/2 protocol (enabled by default in lighttpd 1.4.59) uses more memory than HTTP/1.1;
    low-memory systems might choose to disable HTTP/2 protocol support: server.feature-flags += ("server.h2proto" => "disable")

lighttpd configuration tuning for traffic shapping (download rate-limiting)

Traffic Shaping
connection.kbytes-per-second
server.kbytes-per-second

lighttpd configuration tuning for timeouts

To free up connections more quickly, tune down the idle timeouts for how long lighttpd waits to read or write to the client (when lighttpd is trying to read or write), or how long lighttpd waits for the next keep-alive request, and for how many keep-alive requests, before lighttpd closes the connection. A value of 0 disables an idle timeout and is not recommended.
server.max-read-idle = 60
server.max-write-idle = 360
server.max-keep-alive-idle = 5
server.max-keep-alive-requests = 100
Generally, server.max-keep-alive-requests should not be set to 0 since setting up a new TCP connection takes more resources than keeping an open idle fd, especially if the connection is over TLS.

Platform-Specific Notes

Note: the following is old and possibly out-dated. Please consider only as a starting point for further testing.

Linux

For Linux 2.4.x you should think about compiling lighttpd with the option
``--disable-lfs`` to disable the support for files larger than 2GB. lighttpd will
fall back to the ``writev() + mmap()`` network calls which is ok, but not as
fast as possible but support files larger than 2GB.

Disabling the TCP options reduces the overhead of each TCP packet and might
help to get the last few percent of performance out of the server. Be aware that
disabling these options most likely decreases performance for high-latency and lossy
links.

  • net.ipv4.tcp_sack = 0
  • net.ipv4.tcp_timestamps = 0

Note: Be carefull with net.ipv4.tcp_timestamps. It caused massive problems for me under benchmark load with a high count of concurrent connections.

Increasing the TCP send and receive buffers will increase the performance a
lot if (and only if) you have a lot of large files to send.

  • net.ipv4.tcp_wmem = 4096 65536 524288
  • net.core.wmem_max = 1048576

If you have a lot of large file uploads, increasing the receive buffers will help.

  • net.ipv4.tcp_rmem = 4096 87380 524288
  • net.core.rmem_max = 1048576

Some things that a high-traffic site found useful:


  # These ensure that TIME_WAIT ports either get reused or closed fast.
  net.ipv4.tcp_fin_timeout = 1
  net.ipv4.tcp_tw_recycle = 1
  # TCP memory
  net.core.rmem_max = 16777216
  net.core.rmem_default = 16777216
  net.core.netdev_max_backlog = 262144
  net.core.somaxconn = 262144

  net.ipv4.tcp_syncookies = 1
  net.ipv4.tcp_max_orphans = 262144
  net.ipv4.tcp_max_syn_backlog = 262144
  net.ipv4.tcp_synack_retries = 2
  net.ipv4.tcp_syn_retries = 2

  # you shouldn't be using conntrack on a heavily loaded server anyway, but these are 
  # suitably high for our uses, insuring that if conntrack gets turned on, the box doesn't die
  net.ipv4.netfilter.ip_conntrack_max = 1048576
  net.nf_conntrack_max = 1048576

Keep in mind that every TCP connection uses the configured amount of memory for socket
buffers. If you've got many connections this can quickly drain the available memory.

See http://www.acc.umu.se/~maswan/linux-netperf.txt for more information on these parameters.

FreeBSD

On FreeBSD you might gain some performance by enabling accept filters. Just
compile your kernel with:


  options   ACCEPT_FILTER_HTTP

or just load it using


  kldload accf_http 

For more ideas about tuning FreeBSD read: tuning(7)

Reducing the recvspace should always be ok if the server only handles HTTP
requests without large uploads. Increasing the sendspace would reduce the
system load if you have a lot of large files to be sent, but keep in mind that
you have to provide the memory in the kernel for each connection. 1024 * 64KB
would mean 64MB of kernel RAM. Keep this in mind.

  • net.inet.tcp.recvspace = 4096

Updated by gstrauss over 2 years ago · 33 revisions