Howto Munin » History » Revision 6
Revision 5 (icy, 2009-10-10 20:11) → Revision 6/10 (icy, 2010-06-12 17:02)
h1. Howto Munin
h2. Installation
Download this file: attachment:lighttpd2_munin.py and save it as "lighttpd" in the directory where all
your munin plugins reside (usually this is /usr/share/munin/plugins/) and make it executeable (chmod +x).
Then issue any of the following commands (with appropriate paths) to enable the graphs:
<pre>
$ ln -s /usr/share/munin/plugins/lighttpd /etc/munin/plugins/lighttpd_requests
$ ln -s /usr/share/munin/plugins/lighttpd /etc/munin/plugins/lighttpd_connections
$ ln -s /usr/share/munin/plugins/lighttpd /etc/munin/plugins/lighttpd_traffic
$ ln -s /usr/share/munin/plugins/lighttpd /etc/munin/plugins/lighttpd_statuscodes
</pre>
You need to enable [[mod_status]] in your config. Example config:
<pre>
if req.path == "/status" { status.info; }
</pre>
Now restart your munin-node service and wait for the graphs to appear.
If you use a different URL for your status page, you'll need to put the following snippet
in your munin node config file (usually /etc/munin/plugin-conf.d/munin-node):
<pre>
[lighttpd_*]
env.statusurl http://ip/other_status
</pre>
h2. Screenshots
!lighttpd_connections-day.png!
!lighttpd_traffic-day.png!
!lighttpd_requests-day.png!