Project

General

Profile

Actions
History

Docs » Mod magnet »

AbsoLUAtion » History » Revision 44

« Previous | Revision 44/55 (diff) | Next »
gstrauss, 2021-11-04 05:01

AbsoLUAtion - The powerful combo of lighttpd + Lua

We want to build a central resource for lighttpd + Lua as this is one of the biggest advantages lighttpd has over other webservers. It's useful, handy, simple and sometimes a quite powerful combo which gives you some additional flexibility and offers you solutions to small and big problems other httpds can't solve!

Again, we hope that you, the users of lighttpd, support this page by contributing links, code-snippets or simply offer your lua scripts with small descriptions of what they do and how it helps lighttpd to do stuff you want it to do.

Requirements

Links

Dead links? You don´t like to be listed here? Please remove it. Thanks!

Code-Snippets

The is_file/is_dir dilemma

Known from Apache´s .htaccess:
Hint: see url.rewrite-if-not-file for the !-f part

RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule ^(.*)$ index.php?q=$1 [L,QSA]

As lighttpd doesn't provide this is_file/is_dir check out of the box, again mod_magnet comes into play. I took the example for drupal from darix site.

Lets assume drupal is already installed under http://example.com/drupal/ you now add the magnet part to it.

$HTTP["url"] =~ "^/drupal" {
    # we only need index.php here.
    index-file.names = ( "index.php" )
    # for clean urls
    magnet.attract-physical-path-to = ( "/etc/lighttpd/drupal.lua" )
}

The drupal.lua:

-- little helper function
function file_exists(path)
  return lighty.stat(path) and true or false
end
function removePrefix(str, prefix)
  return str:sub(1,#prefix+1) == prefix.."/" and str:sub(#prefix+2)
end

-- prefix without the trailing slash
local prefix = '/drupal'

-- the magic ;)
if (not file_exists(lighty.env["physical.path"])) then
    -- file still missing. pass it to the fastcgi backend
    request_uri = removePrefix(lighty.env["uri.path"], prefix)
    if request_uri then
      lighty.env["uri.path"]          = prefix .. "/index.php" 
      local uriquery = lighty.env["uri.query"] or "" 
      lighty.env["uri.query"] = uriquery .. (uriquery ~= "" and "&" or "") .. "q=" .. request_uri
      lighty.env["physical.rel-path"] = lighty.env["uri.path"]
      lighty.env["request.orig-uri"]  = lighty.env["request.uri"]
      lighty.env["physical.path"]     = lighty.env["physical.doc-root"] .. lighty.env["physical.rel-path"]
    end
end
-- fallthrough will put it back into the lighttpd request loop
-- that means we get the 304 handling for free. ;)

Overwrite default mime-type/content-type

Add "magnet.attract-physical-path-to = ( "/path-to/change-ctype.lua" )" to lighttpd.conf and save the following as "change-ctype.lua" 

 if (string.match(lighty.env["physical.rel-path"], ".swf")) then
    lighty.header["Content-Type"] = "text/html"

Sending text-files as HTML

This is a bit simplistic, but it illustrates the idea: Take a text-file and cover it in a "< pre >" tag.

Config-file

  magnet.attract-physical-path-to = (server.docroot + "/readme.lua")

readme.lua

  lighty.content = { "<pre>", { filename = "/README" }, "</pre>" }
  lighty.header["Content-Type"] = "text/html" 

  return 200

Redirect map

redirect-map.lua redirect-map based on url-path

Simple maintenance script

You need three files, maint.up, maint.down and maint.html.
maint.html holds a simple html-page of what you want to display to your users while in maintenance-mode.

Add "magnet.attract-physical-path-to = ( "/path-to-your/maint.lua" )" to your lighttpd.conf, best is global section or within a host-section of your config, e.g. a board/forum/wiki you know a maintenance-mode is needed from time to time. If you want to switch to maintenance-mode, just copy maint.down to maint.lua in your "/path-to-your/" location, and lighttpd will display your maint.html to all users - without restarting anything - this can be done on-the-fly. Work is done and all is up again? Copy maint.up to maint.lua in your "/path-to-your/" location. Whats maint.up doing? Nothing, just going on with normal file serving :-)

maint.up - all is up, user will see normal pages

-- This is empty, nothing to do.

maint.down - lighttpd will show the maintenance page -> maint.html

-- lighty.header["X-Maintenance-Mode"] = "1" 
-- uncomment the above if you want to add the header
lighty.content = { { filename = "/path-to-your/maint.html" } }
lighty.header["Content-Type"] = "text/html" 
return 503
-- or return 200 if you want

selecting a random file from a directory

Say, you want to send a random file (ad-content) from a directory.

To simplify the code and to improve the performance we define:

  • all images have the same format (e.g. image/png)
  • all images use increasing numbers starting from 1
  • a special index-file names the highest number

Config

  server.modules += ( "mod_magnet" )
  magnet.attract-physical-path-to = ("random.lua")

random.lua

  dir = lighty.env["physical.path"]

  f = assert(io.open(dir .. "/index", "r"))
  maxndx = f:read("*all")
  f:close()

  ndx = math.random(maxndx)

  lighty.content = { { filename = dir .. "/" .. ndx }}
  lighty.header["Content-Type"] = "image/png" 

  return 200

denying illegal character sequences in the URL

Instead of implementing mod_security, you might just want to apply filters on the content and deny special sequences that look like SQL injection.

A common injection is using UNION to extend a query with another SELECT query.

  if (string.find(lighty.env["request.uri"], "UNION%s")) then
    return 400
  end

Traffic Quotas

If you only allow your virtual hosts a certain amount for traffic each month and want to disable them if the traffic is reached, perhaps this helps:

  host_blacklist = { ["www.example.org"] = 0 }

  if (host_blacklist[lighty.request["Host"]]) then
    return 404
  end

Just add the hosts you want to blacklist into the blacklist table in the shown way.

Complex rewrites

If you want to implement caching on your document-root and only want to regenerate content if the requested file doesn't exist, you can attract the physical.path:

  magnet.attract-physical-path-to = ( server.document-root + "/rewrite.lua" )

rewrite.lua

  attr = lighty.stat(lighty.env["physical.path"])

  if (not attr) then
    -- we couldn't stat() the file for some reason
    -- let the backend generate it

    lighty.env["uri.path"] = "/dispatch.fcgi" 
    lighty.env["physical.rel-path"] = lighty.env["uri.path"]
    lighty.env["physical.path"] = lighty.env["physical.doc-root"] .. lighty.env["physical.rel-path"]
  end

Extension rewrites

If you want to hide your file extensions (like .php) you can attract the physical.path:

  magnet.attract-physical-path-to = ( server.document-root + "/rewrite.lua" )

rewrite.lua

  attr = lighty.stat(lighty.env["physical.path"] .. ".php")

  if (attr) then
    lighty.env["uri.path"] = lighty.env["uri.path"] .. ".php" 
    lighty.env["physical.rel-path"] = lighty.env["uri.path"]
    lighty.env["physical.path"] = lighty.env["physical.doc-root"] .. lighty.env["physical.rel-path"]
  end

User tracking

... or how to store data globally in the script-context:

Each script has its own script-context. When the script is started it only contains the lua-functions and the special lighty.* name-space. If you want to save data between script runs, you can use the global-script context:

  if (nil == _G["usertrack"]) then
    _G["usertrack"] = {}
  end
  if (nil == _G["usertrack"][lighty.request["Cookie"]]) then
    _G["usertrack"][lighty.request["Cookie"]]
  else 
    _G["usertrack"][lighty.request["Cookie"]] = _G["usertrack"][lighty.request["Cookie"]] + 1
  end

  print _G["usertrack"][lighty.request["Cookie"]]

The global-context is per script. If you update the script without restarting the server, the context will still be maintained.

WordpressMU

wpmu.lua

if (not lighty.stat(lighty.env["physical.path"])) then
  if (string.match(lighty.env["uri.path"], "^(/?[^/]*/)files/$")) then
    lighty.env["physical.rel-path"] = "index.php" 
  else
    n, a = string.match(lighty.env["uri.path"], "^(/?[^/]*/)files/(.+)")
    if a then
      lighty.env["physical.rel-path"] = "wp-content/blogs.php" 
      lighty.env["uri.query"] = "file=" .. a
    else
      n, a = string.match(lighty.env["uri.path"], "^(/[^/]*)/(wp-.*)")
      if a then
        lighty.env["physical.rel-path"] = a;
      else
        n, a = string.match(lighty.env["uri.path"], "^(/[^/]*)/(.*\.php)$")
        if a then
          lighty.env["physical.rel-path"] = a
        else
          lighty.env["physical.rel-path"] = "index.php" 
        end
      end
    end
  end
  lighty.env["physical.path"] = lighty.env["physical.doc-root"] .. "/".. lighty.env["physical.rel-path"]
end

Content Negotiation

content-negotiation.lua to parse Accept-Language and Accept-Encoding (#2678, #2736) to determine best target file
content-negotiation.lua

Related, see #1259 for lua code to try multiple extensions (a la Apache mod_autoext) to find target file

Fight DDoS

If your Server is under high load because of someone is flooding you with requests, a little bit lua might help you. ;) In our case we've got a lot of requests without a User-Agent in the request header.

if ( lighty.request["User-Agent"]== nil ) then
        file = io.open ("ips.txt","a")
        file:write(lighty.env["request.remote-ip"])
        file:write("\n")
        file:close()
        return 200
end

The field request.remote-ip is available since lighttpd 1.4.23. The file ips.txt must be writeable by the lighttpd user (www-data). The bad guys in the ips.txt file can be dropped into the firewall with a little shell script.

lua can also be used to access a database and reject requests based on data in the database.
See sample reject-bad-actors.lua attached in Files section at the bottom of this page. It uses an mcdb constant database for fast lookups.

Do basic HTTP-Auth against a MySQL DB/Table

(Note: lighttpd mod_auth mod_authn_dbi is more secure and more performant than this simplistic example)

This script works for me, doing HTTP-Auth against a MySQL Table with Lua:

-- vim: set ts=4 sw=4 sts=4 noai noet:
--[[
MySQL Auth Lua Script for lighttpd
How to use:
1) add this to lighttpd.conf
    magnet.attract-raw-url-to = ( "/path/to/script/mysql_auth.lua" )
2) Configure Database Access
3) Create this Table and fill it with users:
    CREATE TABLE IF NOT EXISTS `users` (
      `fdMe` varchar(127) NOT NULL,
      `username` varchar(127) NOT NULL,
      `pass` varchar(127) NOT NULL,
      `realm` varchar(127) DEFAULT NULL,
      PRIMARY KEY (`fdMe`),
      KEY `username` (`username`),
      KEY `password` (`pass`),
      KEY `realm` (`realm`)
    ) ENGINE=MyISAM DEFAULT CHARSET=utf8 COMMENT='Users';

    The column fdMe may/should be changed to a autoincrementing unsigned int or whatever your primary key is.
    If realm is NULL, a user has access to all realms!
    If you want to change this, change the SQL-Statement in checkAuthMySQL()
]]
--[[
    Config Variables
]]
local dbConf = {}
dbConf.database = ''
dbConf.username = ''
dbConf.password = ''
dbConf.hostname = ''
--[[
    Requires
]]
-- Debian package: liblua5.1-socket2
-- required for Base64 De-/encoding. See: http://w3.impa.br/~diego/software/luasocket/home.html
require("mime")
-- Debian package: liblua5.1-sql-mysql-2
-- Lua Mysql Driver
require("luasql.mysql")
--[[
    Function to send HTTP-Auth request
]]
function doAuth()
    lighty.header["WWW-Authenticate"] = string.format('Basic realm="%s"', lighty.env["uri.authority"])
    return 401
end
--[[
    Function to check Auth Creds against MySQL Database
]]
function checkAuthMySQL(user,pass)
    local MySQL = luasql.mysql()
    local con = MySQL:connect(
             dbConf.database
            ,dbConf.username
            ,dbConf.password
            ,dbConf.hostname
        )
    local res = con:execute(string.format([[
            SELECT *
            FROM `users`
            WHERE `username` = '%s'
                AND `pass` = '%s'
                AND (`realm` = '%s' OR `realm` IS NULL)
            ]], 
            con:escape(user),
            con:escape(pass),
            con:escape(lighty.env["uri.authority"]))
        )
    local row = res:fetch ({}, "a")
    -- print(type(row))
    -- close everything
    res:close()
    con:close()
    MySQL:close()
    if (not row) then
        return false
    else
        lighty.req_env['REMOTE_USER'] = user
        return true
    end
end

-- MAIN
--[[
    Check for Authorization Header
    and force Basic Auth if not set.
]]
if (not lighty.request.Authorization) then
    return doAuth()
end
--[[
    Header found: check string for "Basic" and base64 encoded username & password
    - upb = User Password Base64 encoded
]]
_, _, upb = string.find(lighty.request.Authorization, "^Basic%s+(.+)$")
if (not upb) then
    return doAuth()
end

up = mime.unb64(upb) -- Base64 Decode
_, _, username, password = string.find(up, "^(.+):(.+)$") -- split by ":" to get username and password supplied
if (not checkAuthMySQL(username, password)) then return doAuth() end

-- return nothing to proceed normal operation
return

Known Problems:
  • This Script is blocking!!! lighttpd will hang, if there are MySQL connection problems.
  • Additionally, a whole new MySQL Connection is created with every request! So you shouldn't use this on High-Traffic Sites.
  • Passwords are stored plain in MySQL - well, easy to fix. Look for MySQL's PASSWORD function....

Mod_Security

Apache has mod_security available as a WAF (web application firewall) however this isn't available for other webservers. I've written a quick and dirty script to perform a similar task to mod_security using mod_magnet
lighttpd-mod_security-via-mod_magnet

I've been recently working on libmodsecurity binding for openresty which is a nginx+luajit combo. Using patched libmodsecurity and cffi-lua along with modsec.lua and mod_magnet lighttpd can perform incoming request inspection. Currently there is no way to perform request body (POST) and response inspection. Two last would involve additional lua entry points in lighty. Security rules could be obtained at coreruleset.

waf.lua for lighttpd:

local modsec = require "modsec" 

local ok, err = modsec.init("/etc/owasp/modsec.conf")
if not ok then
        print(err)
        return
end

local transaction = modsec.transaction()

if not transaction then
        print("Failed to initialize transaction")
end

-- evaluate connection info and request headers
local req_attr = lighty.r.req_attr
local url = req_attr["uri.scheme"]
         .. "://" 
         .. req_attr["uri.authority"]
         .. req_attr["uri.path-raw"]
         .. (req_attr["uri.query"] and ("?" .. req_attr["uri.query"]) or "") 

local res, err = transaction:eval_connection(req_attr["request.remote-addr"],req_attr["request.remote-port"],
                                                req_attr["uri.authority"],req_attr["request.server-port"],url,
                                                req_attr["request.method"],req_attr["request.protocol"])

if err then
        print("Failed to evaluate connection: ",err)
end

local res, err = transaction:eval_request_headers(lighty.r.req_header)

if err then
        print("Failed to evaluate request headers: ",err)
end

--[[ evaluate request body
Currently no way to evaluate request body
but this function must be run even with nil as arguments
]]

local res, err = transaction:eval_request_body(nil,nil)

if err then
        print("Failed to evaluate request body: ",err)
end

-- Here decision could be made upon modsecurity variables whether handle this request or not
local score = tonumber(transaction.var.tx.anomaly_score)

if score >= 8 then
        print("This request looks nasty overall score is: "..score)
        return 403
end

Example of owasp/modsec.conf

#This is libmodsecurity base configuration
Include modsecurity.conf

Include /opt/openresty/owasp/crs-setup.conf
Include /opt/openresty/owasp/rules/REQUEST-900-EXCLUSION-RULES-BEFORE-CRS.conf
Include /opt/openresty/owasp/rules/REQUEST-901-INITIALIZATION.conf
Include /opt/openresty/owasp/rules/REQUEST-905-COMMON-EXCEPTIONS.conf
Include /opt/openresty/owasp/rules/REQUEST-910-IP-REPUTATION.conf
Include /opt/openresty/owasp/rules/REQUEST-911-METHOD-ENFORCEMENT.conf
Include /opt/openresty/owasp/rules/REQUEST-912-DOS-PROTECTION.conf
Include /opt/openresty/owasp/rules/REQUEST-913-SCANNER-DETECTION.conf
Include /opt/openresty/owasp/rules/REQUEST-920-PROTOCOL-ENFORCEMENT.conf
Include /opt/openresty/owasp/rules/REQUEST-921-PROTOCOL-ATTACK.conf
Include /opt/openresty/owasp/rules/REQUEST-930-APPLICATION-ATTACK-LFI.conf
Include /opt/openresty/owasp/rules/REQUEST-931-APPLICATION-ATTACK-RFI.conf
Include /opt/openresty/owasp/rules/REQUEST-932-APPLICATION-ATTACK-RCE.conf
Include /opt/openresty/owasp/rules/REQUEST-933-APPLICATION-ATTACK-PHP.conf
Include /opt/openresty/owasp/rules/REQUEST-941-APPLICATION-ATTACK-XSS.conf
Include /opt/openresty/owasp/rules/REQUEST-942-APPLICATION-ATTACK-SQLI.conf
Include /opt/openresty/owasp/rules/REQUEST-943-APPLICATION-ATTACK-SESSION-FIXATION.conf
Include /opt/openresty/owasp/rules/REQUEST-949-BLOCKING-EVALUATION.conf
Include /opt/openresty/owasp/rules/RESPONSE-950-DATA-LEAKAGES.conf
Include /opt/openresty/owasp/rules/RESPONSE-951-DATA-LEAKAGES-SQL.conf
Include /opt/openresty/owasp/rules/RESPONSE-952-DATA-LEAKAGES-JAVA.conf
Include /opt/openresty/owasp/rules/RESPONSE-953-DATA-LEAKAGES-PHP.conf
Include /opt/openresty/owasp/rules/RESPONSE-954-DATA-LEAKAGES-IIS.conf
Include /opt/openresty/owasp/rules/RESPONSE-959-BLOCKING-EVALUATION.conf
Include /opt/openresty/owasp/rules/RESPONSE-980-CORRELATION.conf
Include /opt/openresty/owasp/rules/RESPONSE-999-EXCLUSION-RULES-AFTER-CRS.conf

other solutions

external-static

I´ve seen this nice solution somewhere where they host some files locally on their machines. If popularity gets to high, files are too big or for whatever reasons the files are moved to i think it was amazon´s S3 or akamai for faster serving or to cope with high traffic. You still can use your hostname, urls, collect stats from your logs - your users are just redirected with a 302 to the files they ask for.

2008-11-17: Found the source: presto-move-content-to-s3-with-no-code-changes

Request -> check for local copy -> 302 (if not stored locally) -> let users download from a big pipe

Add the following to your lighttpd.conf:

$HTTP["url"] =~ "^/static/[^/]+[.]gif([?].*)?$" { #match the files you want this to work for
  magnet.attract-physical-path-to = ( "/path-to-your/external-static.lua" )
}

Save the following to external-static.lua:

 local filename = lighty.env["physical.path"]
 local stat = lighty.stat( filename )
 if not stat then
   local static_name = string.match( filename, "static/([^/]+)$" )
   lighty.header["Location"] = "http://<new-location-with-big-pipes>/" .. static_name
   return 302
 end

Sample Files

Updated by gstrauss about 3 years ago · 44 revisions